morzello.com

Di seguito pubblico uno script utile per chi vuole caricare su mediafire uno o più file da console senza dover utilizzare un browser web. Questo script è utile in caso di job notturni o programmi che non richiedono l’intervento dell’utente.

#!/bin/bash

#
# Copyright (c) 2011 vittorio benintende
# (vittorio@lucullo.it - http://www.morzello.com).
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# 3. Neither the name of the Site nor the names of its contributors
#    may be used to endorse or promote products derived from this software
#    without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE SITE AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE SITE OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
#
# --- PARAMS ---
#
# login and password must be url-encoded!
#

MF_LOGIN='mediafire%40morzello.com'
MF_PWD='mypass'

# --- PARAMS ---
#
# DO NOT MODIFY LINES BELOW
#

MF_FILES="$@"

if [ "z${MF_FILES}" = "z" ]; then
	echo
	echo "No file(s) specified."
	echo
	echo "USAGE: $0 : file1 file2 ..."
	echo

	exit 1
fi

OUTPUT_FILE=$(mktemp)
COOKIE_FILE=$(mktemp)

rdom () { local IFS=\> ; read -d \< E C ;}

wget -q --save-cookies ${COOKIE_FILE} --keep-session-cookies -O /dev/null "https://www.mediafire.com/"

wget -q --load-cookies ${COOKIE_FILE} --save-cookies ${COOKIE_FILE} --keep-session-cookies --referer="https://www.mediafire.com/" \
     --post-data "login_email=${MF_LOGIN}&login_pass=${MF_PWD}&login_remember=on&submit_login.x=97&submit_login.y=18" \
     -O /dev/null "https://www.mediafire.com/dynamic/login.php"

wget -q --load-cookies ${COOKIE_FILE} --save-cookies ${COOKIE_FILE} --keep-session-cookies --referer="https://www.mediafire.com/myfiles.php" \
     -O ${OUTPUT_FILE} "https://www.mediafire.com//basicapi/uploaderconfiguration.php?45144"

UPLOAD_SESSION=$(while rdom; do
    if [[ ${E} = "upload_session" ]]; then
        echo ${C}
        exit
    fi
done < ${OUTPUT_FILE})

# echo "Upload Session = ${UPLOAD_SESSION}"

UKEY=$(while rdom; do
    if [[ ${E} = "ukey" ]]; then
        echo ${C}
        exit
    fi
done < ${OUTPUT_FILE})  

# echo "UKey = ${UKEY}"

TRACKKEY=$(while rdom; do
    if [[ ${E} = "trackkey" ]]; then
        echo ${C}
        exit
    fi
done < ${OUTPUT_FILE})

# echo "Track Key = ${TRACKKEY}"

FOLDERKEY=$(while rdom; do
    if [[ ${E} = "folderkey" ]]; then
        echo ${C}
        exit
    fi
done < ${OUTPUT_FILE})  

# echo "Folder Key = ${FOLDERKEY}"

MFULCONFIG=$(while rdom; do
    if [[ ${E} = "MFULConfig" ]]; then
        echo ${C}
        exit
    fi
done < ${OUTPUT_FILE})  

# echo "MFUL Config = ${MFULCONFIG}"

MF_USER=$(while rdom; do
    if [[ ${E} = "user" ]]; then
        echo ${C}
        exit
    fi
done < ${OUTPUT_FILE})  

# echo "User = ${MF_USER}"

for FILENAME in ${MF_FILES}; do

	SHORT_FILENAME=$(basename "${FILENAME}")
	FILESIZE=$(stat -c%s "${FILENAME}")

	wget -q --load-cookies ${COOKIE_FILE} --save-cookies ${COOKIE_FILE} --keep-session-cookies --referer="https://www.mediafire.com/myfile.php" \
	     --header="Content-Type: application/octet-stream" \
	     --header="X-Filename: ${SHORT_FILENAME}" \
	     --header="X-Filesize: ${FILESIZE}" \
	     --post-file="${FILENAME}" \
	     -O ${OUTPUT_FILE} "https://www.mediafire.com/douploadtoapi/?type=basic&ukey=${UKEY}&user=${MF_USER}&uploadkey=${FOLDERKEY}&filenum=0&uploader=0&MFULConfig=${MFULCONFIG}"

	RESKEY=$(while rdom; do
	    if [[ ${E} = "key" ]]; then
	        echo ${C}
	        exit
	    fi
	done < ${OUTPUT_FILE})

	# echo "${FILENAME} > ${RESKEY}" 

	# get result

	RUN=1

	while [ ${RUN} -eq 1 ]; do
		wget -q --load-cookies ${COOKIE_FILE} --save-cookies ${COOKIE_FILE} --keep-session-cookies --referer="https://www.mediafire.com/myfile.php" \
		     -O ${OUTPUT_FILE} "https://www.mediafire.com/basicapi/pollupload.php?key=${RESKEY}&MFULConfig=${MFULCONFIG}"

		QUICKKEY=$(while rdom; do
		    if [[ ${E} = "quickkey" ]]; then
		        echo ${C}
		        exit
		    fi
		done < ${OUTPUT_FILE})

		FILEERROR=$(while rdom; do
		    if [[ ${E} = "fileerror" ]]; then
		        echo ${C}
		        exit
		    fi
		done < ${OUTPUT_FILE})

		# echo "${QUICKKEY} ; ${FILEERROR}" 

		RUN=0
		if [ "z${FILEERROR}" = "z" ] && [ "z${QUICKKEY}" = "z" ]; then
			RUN=1

		fi

		#
		#..

		#...
		#... File too large. 1 0 
		#... File too small. 2 0 
		#... Archive is bad. 3 0 
		#... Archive is bad or password protected. 4 0 
		#... Virus found. 5 0  
		#... File already uploaded. 13 0  
		#... Archive has an unknown problem. 9 0 
		#... Invalid image. 10 0 
		#... File lost. 6 1 
		#... Error scanning file. 7 1 
		#... Disk error. 8,11 1 
		#... Database error. 12 1 
		#..
		#	

		case "${FILEERROR}" in
			1) FILEERROR=" 1 : File too large."
			;;
			2) FILEERROR=" 2 : File too small."
			;;
			3) FILEERROR=" 3 : Archive is bad."
			;;
			4) FILEERROR=" 4 : Archive is bad or password protected."
			;;
			5) FILEERROR=" 5 : Virus found."
			;;
			13) FILEERROR="13 : File already uploaded."
			;;
			9) FILEERROR=" 9 : Archive has an unknown problem."
			;;
			10) FILEERROR="10 : Invalid image."
			;;
			6) FILEERROR=" 6 : File lost."
			;;
			7) FILEERROR=" 7 : Error scanning file."
			;;
		  FILEERROR=" 8 : Disk error."
			;;
			11) FILEERROR="11 : Disk error."
			;;
			12) FILEERROR="12 : Database error."
			;;
			*) FILEERROR="0 : Success."
			;;
		esac

	done 

	echo "${FILEERROR} | ${FILENAME} > ${QUICKKEY}"
done

rm ${OUTPUT_FILE}
rm ${COOKIE_FILE}

Prima di iniziare
Prima di utilizzare lo script è necessario impostare i parametri di login e password in uso su medaifire. Bisogna ricordare che questi paramentri sono url-encoded; questo perchè vengono esposti direttamente nell’url di login. Ad esempio:

mediafile@morzello.com -> mediafire%40morzello.com

Usare lo script
Per utilizzare lo script basta indicare il file o i file da inviare al server:

./mfup.sh myfile.txt all.* /root/repo/*

Ricordate però che non verranno prese in considerazione le sottocartelle.

Alla prossima